Icom FR6200H 61 IDAS 32 Channel 50-Watt UHF 450-512MHz Digital Repeater

The FR5200H repeaters employ a high-power performance backed by the IDAS system network, features such as analog FM and mixed mode capabilities allows seamless connectivity for any operation. The IDAS FR5200 series repeaters are equipped with plenty of power and functions for any task. The 6.25 khz spacing per channel significantly improves the audio quality. Digital/analog mixed mode operation allows the user to migrate at their own pace simpler, and the network interface option can expand communications while saving time.

Channels: 32 channels
Output Power: 50W
Frequencies: 450-512 MHz
Digital Conventional: IDAS built-in

Options with the Trunking Network Controller Board

The FR5200 offers multiple configurations when adding the UC-FR5300 trunking and network controller board. These configurations are ideal for industries such as education, healthcare, hospitality, transportation and logistics, utilities, construction, oil and mining.

Single Site Trunking

Installing and programming a UC Board into the FR5200 repeater can transform the FR5200 from a conventional repeater into a trunked repeater system for a single site. Any IDAS subscriber digital radios are ready to operate on conventional or trunked digital radios for easy configuration choice. Single Site Trunking is ideal for a large area of operation with multiple groups and users.

Multisite Conventional Systems

Inserting the CF-FR5000 02 card into the UC board, the UC and repeaters increase their capabilities to include multisite conventional operation. Multisite conventional systems connect conventional repeaters using an IP network to merge geographically distributed repeaters and operate them as one, or allow UHF and VHF repeaters to share traffic in a crossover configuration. This is ideal for operations that can merge multiple talk sites into one. Industries such as construction, mining, education, transportation and logistics would benefit.

Multisite conventional systems are possible with IDAS LINQ. Choose from the following configurations: LINQREPEAT, LINQREPEAT+, LINQVOTE, and LINQVOTE+.

Multisite Conventional Voting

The UC and CF-FR5000 02 card in the FR5200 can be configured to a voting receiver, which is best for radios that cannot reach transmitters in areas of poor coverage. Once a signal is received at the voter, it is then transferred via IP to the repeater which then transmits the strongest signal. Voting allows the extension of indoor or underground communication which would benefit industries such as education, healthcare and hospitality.

MultiTrunk

The FR5200 can be built to a 48-site, 30 channels per site trunked system that are linked via IP. Users have the ability to roam between sites and the administration of users into fleets of users. To unlock these capabilities, install the variant CF-FR5000MT card onto the UC slot. This is ideal for operations with multiple talk sites and fleets such as construction, mining, education, transportation and logistics.

Multiple CTCSS, DTCS Tone and RAN Code Cecode

The FR5200H series decodes multiple CTCSS and DTCS as well as digital RAN (Radio Access Number) codes on a per channel basis (up to 16 tones/codes) and downlinks the received signal with a specified tone/ code. This function is useful for sharing a channel with multiple groups.

D-SUB 25-Pin Accessory Connector

The FR5200H series has a programmable D-SUB 25-pin accessory connector for connecting external remote control devices. Also, modulation/demodulation signals can be input/output from the D-SUB connector.

Additional Features

CW ID transmission
±0.5ppm high frequency stability (Digital mode)
2U low profile for 19-inch rack mount
Digital voice scrambler provides 15-bit key (about 32,000 codes)
Built-in inversion voice scrambler (Analog mode)
Built-in audio compander (Analog mode)
PTT priority setting (Local Mic., external PTT or repeater operation)
5-Tone and DTMF encoder/decoder (Analog mode)
Normal and priority scan
Convenient key assign stickers supplied
Beat cancel capability
Low voltage alert (Analog mode)

Contact Two Way Direct to Stay Connected

Once you’ve received your Icom FR6200H digital repeater and start putting them to use on the job, you know you’ll have the support of a leading company for troubleshooting and recommendations of compatible accessories. Order with Two Way Direct for:

The Lowest Price Guaranteed
24/7 Customer Support
Low shipping costs – with free ground shipping

Use this Icom FR6200H digital repeater, with other compatible radios and radio accessories with complete confidence. Order online or call 888-742-5893.

Product Type:	Repeaters
Frequency Band:	UHF
Channels:	32 Channels
Technology:	Digital & Analog (IDAS)
Power Output:	50-Watts
Display:	Yes
Compatible With (Brand):	Icom America