Kenwood

Kenwood NX-5400K2 700/800MHz 3-Watt NXDN, DMR Digital Radio With Display and Limited Keypad

Call (888) 742-5893 for Pricing

(0) Write a Review
SKU:
NX-5400K2

Description

Kenwood NX-5400K2 700/800MHz 3-Watt NXDN, DMR Digital Radio With Display and Limited Keypad

Kenwood's NX-5000 Series offers unsurpassed interoperability for a wide variety of users as it supports three digital CAIs — NXDN, DMR and P25 (Phase 1 & 2) — plus FM analog in a single radio. Best of all, a desired CAI can be selected at will, giving you the freedom to migrate at your own pace — whether you are intent on going fully digital, undecided about which digital system to pick, or just wanting to maintain both digital and analog for a while. An NX-5000 radio can simultaneously support two digital protocols plus analog, offering the following combinations: FM/DMR/ NXDN, FM/NXDN/P25, and FM/DMR/P25.

Feature Overview:

  • MULTI-Digital operation in NXDN protocols 
  • Mixed Digital & FM Analogue Operation allows intelligent migration in mixed sites and easy migration with digital radios in other sites 
  • Large, Color 1.74" (240 x 180 pixels) Transflective TFT Display for better interface even in direct sunlight and with use of polarized sunglasses. 
  • Easy to follow GUI for at-a-glance operational status checking and Multi-line Text to access more information 
  • 4-way Directional-pad (D-pad) and 2-Position Lever Switch for intuitive control and operation 
  • Built-In GPS Receiver/Antenna for effective fleet management 
  • Bluetooth® Module built-in for hands-free operation 
  • Renowned KENWOOD Audio Quality can be achieved with Active Noise Cancelling that utilizes built-in DSP with two microphones for suppression of ambient noise
  • Built-in 56-bit DES Encryption 
  • Optional 256-bit AES Encryption 
  • Built-in Motion Sensor for life-critical man down detection 
  • microSD/microSDHC Memory Card Slot for increased memory capacity for “Voice & Data” 
  • IP67/68 and MIL-STD-810 C/D/E/F/G 

Digital - NXDN Mode:

  • NXDN® Conventional
  • NXDN® TYPE-C (Gen1/Gen2) Trunking (only in 800MHz)

  • AMBE+2TM VOCODER

  • 6.25 & 12.5 kHz Channels

  • Over-the-Air Alias

  • Over-the-Air Programming

  • Paging Call

  • Emergency Call

  • All Group Call

  • Digital Two-Tone
  • Status Messaging
  • Remote Stun/Kill/Check
  • Short & Long Data Messages
  • GPS Location
  • NXDN® Scrambler 

Digital - DMR Mode:

  • DMR Tier 2 Conventional Option 
  • S-Trunking Option
  • DMR Tier 3 Trunking Option
  • DMR Auto Slot Select (DASS)
  • AMBE+2TMVOCODER
  • 12.5 kHz Channels
  • Over-the-Air Programming
  • Call Interrupt (Direct & Repeater Mode) • Paging Call
  • Emergency Call
  • All Group Call
  • Late Entry
  • Status Messaging
  • Remote Control by Subscriber Units
  • ARC4 Encryption Optional
  • Site Roaming 

Analog Mode:

  • NPSPAC Channels
  • Conventional Zones
  • LTR® Zones
    FleetSync
  • FleetSync®/II: PTT ID ANI, Caller ID Display, Selective/Group Call, Emergency Status,Text Messages
  • MDC-1200: PTT ID ANI, Caller ID Display, Emergency, Radio Check & Inhibit QT / DQT
  • Two-Tone (Conventional Zones Only) 

Contact Two Way Direct to Stay Connected

Once you’ve received your Kenwood NX-5400K2 two-way radio and start putting them to use on the job, you know you’ll have the support of a leading company for troubleshooting and recommendations of compatible accessories. Order with Two Way Direct for:

  • The Lowest Price Guaranteed
  • 24/7 Customer Support
  • Low shipping costs – with free ground shipping

Use this Kenwood NX-5400K2 two-way radio with complete confidence. Order online or call 888-742-5893.

Warranty Information

3 Year Warranty

Specifications

Product Type:
Handheld Radios
Technology:
Digital & Analog (NXDN)
Compatible With (Brand):
Kenwood
Frequency Band:
700/800MHz
Channels:
1024 Channels
Power Output:
3-Watts
Display:
Yes